Technical data
Properties of worktops
| Property | Unit | Requirement | Test method |
|---|---|---|---|
| Thickness tolerance |
mm |
+/- 0,2 |
|
| Length tolerance |
mm |
+/- 5,0 |
|
| Width tolerance |
mm |
+/- 0,5 |
|
| Scratch resistance |
N |
≥ 3 |
EN 438-2 |
| Abrasion resistance |
revolutions |
IP ≥ 150, IP+FP/2 ≥ 350 |
EN 438-2 |
| Impact strength |
N |
≥ 20 |
EN 438-2 |
| Resistance to hot bottom of a dish (180◦C) |
Degree (min) |
SQ surface: 3, other surfaces: 4 |
EN 438-2 |
| Stain resistance |
Degree (min) |
group 1 i 2: 5 group 3: 4 |
EN 438-2 |
| Formaldehyde emission |
E1 Class |
Thickness and size of Worktops
| Size mm |
||
|---|---|---|
| 3050 x 600 x 28 |
one - side rounded |
standard |
| 3050 x 1200 x 28 |
two - side rounded |
on request |
| 3050 x 600 x 38 |
one - side rounded |
on request |
| 3050 x 1200 x 38 |
two - side rounded |
on request |
Workop finish
- the top surface and the rounded front edge are covered with HPL or CPL laminate,
- the straight back edge is covered with a BK type melamine edging tape,
- the bottom surface is covered with a backing paper for laminates,
- the contact site between the laminate and the backing paper is protected with a polyurethane glue
For edge finishing we offer edging adhesive tapes. They match the color of the worktop.
- size 3000 x 31 mm - packed 10 pcs. In a box,
- size 3000 x 41 mm - packed 8 pcs. In a box,
Profile: type C10 for: PE, PR, MAT, KM, SK, BZ, LP structures
Profil: type G2 for: SQ, SM structures
Profile: type G6 for thickness: 38mm
Profile: type C10 for: PE, PR, MAT, KM, SK, BZ, LP structures
Profile: type G2 for: SQ, SM structures
